Discover the world with Go!Explore

A quick start guide to getting going with Go!Explore.

Consisting of a GPS receiver attachment and a software UMD of map data, Go!Explore turns your PSP into a robust navigation tool, which is easy to set up and use straight out of the box.

How to set up Go!Explore

1. Fit the GPS receiver, attaching it to the top of your PSP by plugging it into the USB connector. Tighten the mounting screw to hold it in place.

2. To get a good signal pivot the GPS receiver, so that its face is aligned flat to the sky. Its face is the front surface, which bears the satellite symbol and GPS logo.

3. Switch on your PSP and load Go!Explore. When loading Go!Explore for the first time you get the option of copying map data to your Memory Stick. Doing so improves overall performance, including journey recalculation speed and battery life while using Go!Explore.

4. In Go!Explore select [Settings] and then [GPS] to find your position for the first time. When doing this for the first time, it can take between five and ten minutes for the GPS receiver and Go!Explore to calibrate, after which you're ready to go.

Note:

• When you set up Go!Explore for the first time you must ensure the WLAN switch on your PSP is turned off and that you're stationary, outdoors and away from tall buildings, to get the best possible satellite coverage.